★ Typical Properties of JOJUN-8600 Series Thermal Paste
|
Thermal Conductive Paste
|
|
Property
|
Unit
|
Product Series
|
Test Method
|
|
JOJUN-8600
|
|
Color
|
|
Blue
|
Visual
|
|
Density
|
g/cc
|
3.2
|
ASTM D792
|
|
Extrusion Speed @30cc, 90psi
|
g/min
|
10-90
|
|
|
Application Temperature
|
℃
|
-50~+200
|
|
|
Flammability Class
|
|
V0
|
UL94
|
|
Thermal Conductivity
|
W/m-K
|
6
|
ASTM D5470
|
|
Breakdown Voltage
|
KV/mm
|
>5
|
ASTM D149
|
|
Volume Resistivity
|
ohm-cm
|
10^13
|
ASTM D257
|
|
Dielectric Constant
|
1MHz
|
7
|
ASTM D150
|
★ Application
LED chip
Communication equipment,
Mobile phone CPU,
Memory module,
IGBT
Power modules,
Power semiconductor field.
★ Usage
★ Production Process
Mix Stir
Extrusion
Thermal Pad Production Line
Crop
Package
Outgoing Goods
★R&D Center
Voltage Breakdown Tester
Thermal Conductivity Tester
Kneader
Laboratory
★Features And Benefits
Compared with thermal pad, thermal paste is softer and has better surface affinity. It can be compressed to a very low thickness, which significantly improves the heat transfer efficiency, and can be compressed to 0.1mm at the lowest. At this time, the thermal resistance can range from 0.08℃·in2/W to 0.3 ℃·in2/W, which can reach the performance of part of the silicone grease. In addition, thermal paste has almost no hardness, after the use of the equipment will not produce internal stress.
Thermal paste is easier to work with than thermal grease. The general use of silicone grease is screen or steel plate printing, or direct brush coating, is very unfriendly to the user and the environment, and because of its certain fluidity, generally can not be used for thicker than 0.2mm occasions.
And the thermal conductivity mud arbitrary molding into the desired shape, for the uneven PCB board and irregular devices (such as batteries, components corner parts, etc.), can ensure good contact. Thermal gel has a certain adhesion, and will not have the problem of oil and dry, has a certain advantage in reliability.
★ Certificates